Management Interface Configuration - Samsung WEC8500 Operation Manual
Access point controller
Hide thumbs
Also See for WEC8500:
- Operation manual (689 pages) ,
- Maintenance manual (88 pages) ,
- Operation manual (534 pages)
Table of Contents
Advertisement
2600-00FK1RGA4
Ver.
4.1.2
Management Interface Configuration
The APC can communicate with a W-EP wireless LAN AP using management interface.
This is one of the information that must be configured first of all for wireless LAN service.
Configuration using CLI
To configure management interface, execute the command as follows:
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Configure a management interface.
apc ap-mgmt-if [IP_ADDRESS]
Parameter
IP_ADDRESS
3) To check the configured IP information, use the 'show apc summary' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <General> menu in the sub-menus.
After entering a configuration in the AP Management of the window, click the <Apply>
button.
© SAMSUNG Electronics Co., Ltd.
3.0
IP address of APC that is used for communication with a W-EP
wireless LAN AP
Figure 55. Management interface configuration
CHAPTER 4. AP Connection Management
Description
page 127 of 496
Advertisement
Chapters
Table of Contents
