2600-00FK1RGA4
Ver.
5.1.2
WLAN Additional Configuration
Each wireless terminal can receive a differentiated service according to the WLAN
configuration. The procedure of configuring the WLAN additional function is as follows.
Configuration using CLI
1) Go to configure wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2) Select whether to provide the authentication service using the AAA server.
aaa-overide
3) Determine whether to configure the Guest service.
guest-flag
4) Configure a VLAN ID to use locally.
local-vlan [VLAN_ID]
Parameter
VLAN_ID
5) Specify the service MAC type.
mac-type [MAC_TYPE]
Parameter
MAC_TYPE
6) Select a radio bandwidth to provide the WLAN service.
radio [RADIO]
Parameter
RADIO
7) Select whether to provide the SSID as hidden. If it is set to 'hidden', the SSID is not
found when other devices do searching.
suppress-ssid
© SAMSUNG Electronics Co., Ltd.
3.0
- localMac: An AP itself provides data service.
- splitMac: Provides data service through the APC.
- 1: 5 GHz
- 2: 2.4 GHz
- 3: Supports both 5/2.4 GHz
CHAPTER 5. WLAN Management
Description
VLAN ID (range: 1-4094)
Description
Description
page 167 of 496