2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <OSPF> <Area> <NSSA> menu in the sub-menus.
The default window is shown below.
The default configuration screen is shown below.
The NSSA window screen is shown as below after detail configuration is completed.
If you select a Process ID after NSSA default configuration, operator can do detail
configuration.
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 3. Data Network Function
page 85 of 496