Spectrum Analysis Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
802.11bgn Video Camera........................... Enabled
ZigBee........................................... Enabled
802.11an Continuous Transmitter.................. Enabled
802.11an DECT-like Phone......................... Enabled
802.11an Video Camera............................ Enabled
Real Time Interference Report:
Number of Interferers................................. 1
Num Evoke
Frequency
--- ------------------- -------------------------------- ---- --------
--------- -----------------
1 2012-06-29 08:52:47 802.11bgn Video Camera -80 2401
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Interference Device> menu in the sub-menus. You can retrieve the interference report.
7.6.2

Spectrum Analysis Configuration

You can configure the spectrum analysis function and also a spectrum analysis channel that
will be applied to each spectrum report. The channel information is as follows:
Radio
2.4 GHz
5 GHz Low
5 GHz Mid
5 GHz High
To configure the spectrum analysis related function, you must go to the configuration mode
of an AP for which the spectrum analysis function will be configured by executing the
command as follows:
APC# configure terminal
APC/configure# spectrum-analysis ap 1
APC/configure/spectrum-analysis/ap 1#
© SAMSUNG Electronics Co., Ltd.
3.0
Time Interferer Type
Figure 118. Spectrum Analysis Data
All, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
All, 36, 40, 44, 48, 52, 56, 60, 64
All, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136,140
All, 149, 153, 157, 161, 165
CHAPTER 7. WLAN Additional Services
RSSI Minimum Frequency Maximum
Channel
2401
page 249 of 496