2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <VRRP> menu in the sub-menus.
The VRRP menu provides two sub menus, i.e. Operation and Circuit Failover.
[Operation]
When you click the <Enable>/<Disable> button, you can Enable or disable VRRP.
In addition, when you click the <Add> or <Delete> button, you can add or delete VRRP
configuration.
[Circuit Failover]
When you click the Circuit Failover menu, the VRRP list is displayed on the window.
To perform detail configuration, select one of VRRP items.
After selecting a configuration you want, select the <Apply> button to apply the
configuration.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 32. VRRP-Operation Window
Figure 33. VRRP-Circuit Failover Window (1)
Figure 34. VRRP-Circuit Failover Window (2)
CHAPTER 3. Data Network Function
page 104 of 496