Configuring Qos Profile Of A Specific Terminal - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
6.2.3

Configuring QoS Profile of a Specific Terminal

You can configure a QoS profile that is applied to a specific wireless terminal. This QoS
profile is applied from the RADIUS server of a wireless terminal during authentication.
Configuration using CLI
1) Go to configure  QoS profile configuration mode of CLI.
APC# configure terminal
APC/configure# qos <profile name>
APC/configure/qos Samsung #
2) Configure 802.1p and a DSCP value that will be used for each access category.

ac [AC] [802.1P_TAG] [DSCP_TAG]
Parameter
AC
802.1P_TAG
DSCP_TAG
3) Configure the brief information of a profile.

description [DESCRIPTION]
Parameter
DESCRIPTION
4) Configure maximum allowed 802.1p priority value used in the Traffic Identifier (TID)
field of AP QoS packet.

max-dot1p <802.1p tag>
Parameter
802.1P_TAG
5) To check the configured QoS profile information, use the 'show qos profile' command.
© SAMSUNG Electronics Co., Ltd.
3.0
Access Category(AC_VO/AC_VI/AC_BE/AC_BK)
802.1p configuration (range: 0-7)
DSCP tag configuration (range: 0-63)
Description
Description
Profile description
Description
Maximum allowed 802.1p configuration (range: 0-7)
CHAPTER 6. Wi-Fi Configuration
page 218 of 496