Samsung WEC8500 Operation Manual page 97
Access point controller
Hide thumbs
Also See for WEC8500:
- Operation manual (689 pages) ,
- Maintenance manual (88 pages) ,
- Operation manual (673 pages)
Table of Contents
Advertisement
2600-00FK1RGA4
Ver.
mtu
mtu-ignore
network
priority
retransmit-interval
state advertisements
transmit-delay
Configuring DISABLE OSPF
WEC8500/configure/interface ge2# ip ospf disable ?
all
WEC8500/configure/interface ge2# ip ospf disable all ?
<cr>
WEC8500/configure/interface ge2# ip ospf disable all
Configuring MTU
The default does not use Maximum Transmission Unit (MTU) configuration. The
range of MTU user configuration is 576-65535.
WEC8500/configure/interface ge2# ip ospf mtu ?
576 - 65535
WEC8500/configure/interface ge2# ip ospf mtu 600
WEC8500/configure/interface ge2#
Configuring Network Type
The network type includes 4 types, i.e. broadcast, non-broadcast, point-to-point, and
point-to-multipoint. The Ethernet is broadcast configuration.
WEC8500/configure/interface ge2# ip ospf network ?
broadcast
network
non-broadcast
point-to-point
point-to-multipoint
WEC8500/configure/interface ge2# ip ospf network
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 3. Data Network Function
OSPF interface MTU
Time between HELLO packets
Network type
Router priority
Time between retransmitting lost link
Link state transmit delay
All functionality
Specify OSPF broadcast multi-access
Specify OSPF NBMA network
Specify OSPF point-to-point network
Specify OSPF point-to-multipoint network
page 97 of 496
Advertisement
Chapters
Table of Contents
