Figure 148. Wids Friendly List Addition Window - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.

Friendly list addition screen
8.2.2.9 Station Allow Limit
The WIDS counts the number of frames and number of authentication failures to
distinguish a station that generates too many management frames in a network or that is
continuously failed for authentication. A threshold value is defined for the count and a
station is recognized as an unauthorized station if the count exceeds the threshold.
Configuration using CLI
1) Go to the configure  wids  rogue  client configuration mode.
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# rogue
WEC8500/configure/wids/rogue# client
WEC8500/configure/wids/rogue/client#
2) Configure a threshold.

allowed-limit [OPTION] [COUNT]
Parameter
OPTION
COUNT
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 148. WIDS Friendly List Addition Window

- 80211-auth-req: Authentication requests threshold per second
- 80211-probe-req: Probe requests threshold per second
- 80211-deauth-req: De-authentication requests threshold per second
- 80211-assoc-fail: Association failures threshold per second
- 80211-auth-fail: Authentication failures threshold per second
- 8021x-auth-fail: 802.1x authentication failures threshold per WIDS
interval
- web-auth-fail: Web authentication failures threshold that occurs
continuously
Threshold value of [OPTION] ranging from 3 to 20
CHAPTER 8. Security
Description
page 298 of 496