Managing Root Service - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
5.1.4

Managing Root Service

To provide a wireless LAN service where cable installation is difficult, a W-EP AP can be
configured as a repeater mode to relay wireless LAN traffics. To configure this kind of
network, the Repeater AP and Root AP are required. The Repeater AP is working as a
wireless terminal and the Root AP connects a Repeater AP to a wireless terminal for
connection to the APC.
The Root AP must configure WLAN 241 for Repeater AP connection.
Configuration using CLI
[WLAN 241 Configuration]
The basic configuration values of WLAN 241 created in the Root AP are as follows.
Category
WLAN
Security
Additional configuration is required for if-group. Execute the command as follows:
1) Go to configure  wlan 241 configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 241
WEC8500/configure/wlan 241#
2) Stop the operation of WALN 241.
WEC8500/configure/wlan 241# no enable
3) Specify a WLAN interface group.

if-group [INTERFACE_GROUP_NAME]
4) Restart WALN 241.
WEC8500/configure/wlan 241# enable
© SAMSUNG Electronics Co., Ltd.
3.0
Item
Radio
SSID
Suppress-ssid
Tunnel-mode
Wpa2
Ccmp
Psk Type
Psk Value
CHAPTER 5. WLAN Management
Default
1 (5 GHz)
!we@jt#kl$wh%kj^sh&md*gc(h)
Enable
LocalBridging
Enable
Enable
Ascii
!qazsxdr%^tfc&*uyhn_)(io;.,m
page 170 of 496