Table of Contents
Advertisement
Canister Installation
1.
Determine the location of the rear canister
mounting hanger. This should be approxi-
mately two thirds back on the canister or as
described in the canister installation instruc-
tions and as desired by the builder. Mark this
location on the edge of the canister tunnel.
2.
Transfer this mark to the top of the canister
tunnel. Ensure the mounting holes in the top
of the canister tunnel will not interfere with
any equipment installed or to be installed in-
side the fuse.
3.
Mark the centerline of the plywood canister
mounting bracket.
4.
Align the centerline of the plywood bracket
with the mounting location previously marked
on the top of the canister tunnel. Mark the
location of the canister bracket mounting
holes.
55
Hide quick links:
Advertisement
Table of Contents
