Table of Contents
Advertisement
7.
Iron the bottom covering to securely seal the
covering to the bottom of the rear tuned pipe
tunnel former.
8.
Dry fit the header and tuned pipe inside the
tunnel and ensure there is clearance on all
sides.
Tuned Pipe Installation
1.
Determine the location of the rear tuned pipe
mounting hanger. This should be approxi-
mately two thirds back on the pipe or as de-
scribed in the pipe installation instructions and
as desired by the builder. Mark this location
on the edge of the tuned pipe tunnel.
2.
Transfer this mark to the top of the tuned pipe
tunnel. Ensure the mounting holes in the top
of the pipe tunnel will not interfere with any
equipment installed or to be installed inside
the fuse.
64
Hide quick links:
Advertisement
Table of Contents
