Table of Contents
Advertisement
5.
Draw the 18" servo extension through the
wing and pull through the wing root rib.
6.
Attach one female end of the Y harness to the
inboard servo lead.
7.
Secure the servo connectors with safety wire,
string, tape, or other method. Ensure the con-
nectors will not come apart from vibration or
light tension.
8.
Fasten the pull string from the inboard servo
hole to the male connector of the Y harness.
Secure with tape so that the string pulls from
the front end of the connector
drawing the servo wire through the wing
without hanging up inside the wing.
10
to assist in
Hide quick links:
Advertisement
Table of Contents
