Table of Contents
Advertisement
7..
Install the fuel filling dot as desired on the side
of the fuse. Do not allow the fuel dot to
interfere with the leading edge of the wing.
Note: The higher you mount the fuel fill dot the
less fuel will siphon out when fueling.
Ignition Installation
1.
Gather the engine ignition parts as shown be-
low. Engine ignition, nylon ties, and foam
rubber.
2.
Locate the plywood ignition mounting bracket
as shown.
3. Use thick CA to glue the ignition mounting
bracket to the side of the engine mounting box.
Note: This is an optional step only if you
select to mount your ignition in the same
fashion as shown.
82
Hide quick links:
Advertisement
Table of Contents
