Table of Contents
Advertisement
3.
Transfer this distance to the bottom of the fuse
starting from the center of the engine cylinder
head.
4.
Dry fit the header and canister to the bottom of
the fuse and ensure there is one inch of space
from the line just marked to the rear of the
canister.
5.
Draw a line across the fuse belly on the mark
location as shown. This will be the location of
the rear former of the canister tunnel.
6.
Use a hobby knife to remove the covering
from the front former to the front of the land-
ing gear cross brace as shown.
51
Hide quick links:
Advertisement
Table of Contents
