Table of Contents
Advertisement
9.
Pull the 18" extension from the outboard servo
and the Y harness from the inboard servo out
of the root rib as shown.
10.
Plug the remaining female end of the Y har-
ness into the male end of the 18" extension
and secure as before. Secure the servo con-
nectors with safety wire, string, tape, or other
method. Ensure the connectors will not come
apart from vibration or light tension.
11.
Tuck the excess servo wires inside the wing
root as shown.
12.
Install servo in servo well with the output arm
toward the leading edge of the wing and mark
locations of servo mounting holes.
11
Hide quick links:
Advertisement
Table of Contents
