Table of Contents
Advertisement
15.
Insert the pipe mounting bolts through the
holes in the pipe mounting bracket as shown.
16.
Locate the nylon tie pipe mounting strap and
the silicon rubber tubing as shown below.
17.
Use a pair of scissors to split one end of the
silicon tubing in half approximately 3/4" deep
as shown.
18.
After splitting the silicon tubing cut off one
side of the split section as shown. This will
provide a relief section of the tubing for the
nylon tie lock and insulate it from the metal
pipe surface.
68
Hide quick links:
Advertisement
Table of Contents
