Items Needed To Complete - AeroWorks 75cc YAK-54 ARF-QB Assembly Manual

Hardware:
•
75cc to 80cc gas engine with ignition, Pitts style
muffler or header, with canister or pipe, and
mounting bolts, nuts, and washers.
•
4" Tru-Turn (P-51 style) spinner and propeller
•
4 x aileron servos (min 160 in./oz. Digital, Metal
gear)
•
1 or 2 x rudder servos (min 180 in./oz each or
300 in. / oz. total torque, Digital, Metal gear)
•
2 x elevator servos (min 180 in./oz. Digital,
Metal gear)
•
1 x throttle servo (fast / reliable)
•
1 x choke servo (fast / reliable) (Optional)
•
Servo extensions -(22 gauge min) 3 x Y harness,
2 x 6," 2 x 12," 2 x 18", 2 x 36"
•
1 Receiver (PCM)
•
1 x Receiver battery (min 6.0 volt / 1700ma)
•
1 x ignition battery (min 4.8 volt / 1700ma)
•
2 switches with charge jacks (22 Gauge min)
Tools:

ITEMS NEEDED TO COMPLETE

•
Allen wrenches US and Metric.
•
Dermel cutting disc and sanding drum tool
•
Electric drill and selection of bits
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Ruler and tape measure
•
Scissors
•
T pins
•
Waxed paper
•
Wire Cutters
Adhesives:
•
15-30 Minute epoxy
•
Blue Lock-tite
•
Epoxy mixing cups, sticks, brushes
•
CA kicker (optional)
•
Thick and thin CA
•
Rubbing alcohol
•
Wipes
7