Table of Contents
Advertisement
21.
Slide the pipe mounting doublers under the
fuel tank floor. It will be necessary to insert
the doublers in the lightening hole in the motor
box first, then slide under the fuel tank floor.
22.
Align the blind nuts with the mounting holes
as shown.
23.
Use a drop of thick CA to TACK glue the
pipe mounting doublers in place.
24.
Place the canister strap assembly in the canis-
ter tunnel as shown. Allow the nylon tie lock
to extend out of the tunnel 1/1/2" as shown.
60
Hide quick links:
Advertisement
Table of Contents
