25.
Place the canister mounting bracket over the
canister mounting strap.
26.
Place a drop of blue locktite on each canister
mounting bolt. Insert the two mounting bolts
through the top of the canister tunnel and into
the blind nuts on the opposite side. Tighten
the mounting bolts securely.
27.
After the canister strap is installed use thin CA
to securely glue the pipe mounting doublers in
place.
28.
Cinch the nylon tie around the canister tube
and tighten securely. Ensure that the nylon tie
does not touch the metal surface of the canister
tube and is properly insulated by the silicon
tubing as shown below. Cut off excess tie as
shown.
61