Table of Contents
Advertisement
3.
Install the fuel tank with foam rubber under-
neath as shown. Cinch the nylon ties securely
to hold the tank against the foam on the fuel
tank floor.
4.
Install the fuel tubing as shown securing with
small nylon ties. You will need an after mar-
ket fuel T and fuel filling dot.
Note: We recommend looping the vent line to
the rear of the fuel tank as shown to prevent
fuel spilling when the model's tail is lifted or
flying a down line.
5.
Connect the fuel line to the engine carburetor
intake nipple. Drill a fuel vent line hole in
the bottom of the engine box floor to allow
fuel vent line to exit out the bottom of the
fuse. Secure all connections with nylon ties
as shown.
Note: You may also want to use a fuel filter
in the line to the engine carburetor.
6.
Secure the fuel vent line to the front former for
proper draining.
81
Hide quick links:
Advertisement
Table of Contents
