Table of Contents
Advertisement
17
After splitting the silicon tubing cut off one
side of the split section as shown. This will
provide a relief section of the tubing for the
nylon tie lock and insulate it from the metal
canister surface.
18.
Prepare to slide the silicon tubing onto the ny-
lon tie. The split end of the tubing goes oppo-
site the nylon tie lock a shown.
19.
Slide the silicon tubing onto the nylon tie as
shown to form the canister strap assembly.
20.
Locate the two plywood pipe mounting doub-
lers with pre-installed blind nuts as shown.
59
Hide quick links:
Advertisement
Table of Contents
