Introduction - AeroWorks 75cc YAK-54 ARF-QB Assembly Manual

INTRODUCTION

Your new 75cc YAK-54 ARF-QB is a highly aerobatic airplane. It is capable of both preci-
sion and 3-D maneuvers. The aircraft builds easily, quickly, and precisely due to its state of
the art CAD design, LASER cut technology, and high quality included hardware. We hope
you enjoy building and flying your YAK-54 ARF-QB.
Great care has been taken in both the design and manufacturing of the 75cc YAK-54 ARF-
QB to allow for the strongest and lightest construction possible. Only the highest quality ma-
terials from the covering, paint, wood and hardware have been used in the construction of
this model.
The 75cc YAK-54 ARF-QB has been individually hand built, covered and painted by trained
and experienced craftsmen with over 25 years of manufacturing experience. Using CAD de-
sign, laser cut technology and jig-built assures accuracy in all stages of production.
The 75cc YAK-54 ARF-QB is designed for gas engines in the 75cc to 80cc category. 3W-
75 rear and side carburetor and ZDZ-80 Super engines are shown in the assembly instruc-
tions. The aircraft was tested with the ZDZ-80 Super and has outstanding performance. The
final choice of engine is left up to the builder. A computer radio is recommended to allow
the pilot to take advantage of the full capabilities of this aerobatic aircraft.
IMPORTANT Please read through this manual carefully, before starting the assembly of
your new 75cc YAK-54 ARF-QB. Inventory and inspect all parts and hardware for any im-
perfections or damage. Please notify AEROWORKS immediately if there are missing or
damaged parts.
INTENDED USE
This plane should not be regarded as a toy. This is an aerobatic plane and is recommended
for pilots who are beyond the trainer-stage and are comfortable with flying an aerobatic sport
plane.
READ! WARRANTY READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. If you wish to return this air-
craft for any reason a 15% restock fee will be charged to the customer. In addition the cus-
tomer is responsible for all return shipping cost and all prior shipping cost will not be re-
funded. Parts will be exchanged or replaced once the original item is returned at the owner's
expense. If you have any problems, please contact Aeroworks.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, the purchaser/operator accepts all respon-
sibility of any and all structural or mechanical failures.
4