Table of Contents
Advertisement
ENGINE, THROTTLE, MUFFLER, CANISTER OR PIPE INSTALLATION
Engine Installation
1. The 50cc EXTRA 260 will accept a wide range
of engine types. The DA-50 rear carburetor and
the 3W-55 rear and side carburetor engines with
Pitts style mufflers, canisters, and pipes were
mounted. Illustrations for each type of installa-
tion are provided below.
NOTE: Distance from front of firewall to
engine prop hub is 6 1/4" to 6 3/8".
Depending on your engine selection. The
only difference will be the gap between the
cowling and spinner back plate.
2. Locate the laser cut engine mounting template
for either the DA-50 or 3W-55. If other engines
are used the templates may be modified for any
mounting pattern.
3.
To modify mounting template to accommodate
your engine of choice.. Line up the template
with the engine thrust lines.
4.
Mark the location of the engine mounting
holes on template.
39
Hide quick links:
Advertisement
Table of Contents
