Engine, Muffler Or Canister And Throttle Servo Installation - AeroWorks EXTRA 260 ARF-QB Assembly Manual

ENGINE, MUFFLER OR CANISTER AND THROTTLE INSTALLATION
Engine Installation
1. The 150cc Extra 260 will accept a wide range of
engine types. Illustrations for a DA-150
installation are provided below.
Note: Engine mounting hardware is Not Supplied
2. Locate the laser cut engine mounting template
for the DA-150.
Note: If other engines are used the templates may
be modified to fit you engine selection. Center
your engine over the laser marked thrust lines
on the template. Mark and drill the engine
mounting hole locations for your engine.
Follow the next steps for mounting your
engine
3. Line up the template with the pre-marked
firewall thrust lines. Mark the location of the
engine mounting holes.
4. Center punch the engine mounting hole loca-
tions.
51