Table of Contents
Advertisement
15.
Mark the bottom of the fuse line on the former
and mark the top of the canister tunnel where
the former makes contact.
16.
Use a hobby knife to cut the former to fit the
bottom of the fuse.
17.
Apply thick CA glue to the top of the canister
tunnel former. Insert the former into the tun-
nel and press in place. Apply CA glue to the
sides and bottom to secure the rear canister
tunnel former in place.
18.
Iron the bottom covering to securely seal the
covering to the bottom of the rear canister
tunnel former.
54
Hide quick links:
Advertisement
Table of Contents
