Table of Contents
Advertisement
29.
Make sure the silicon tubing is underneath the
nylon tie and the nylon tie does not touch the
canister pipe.
30.
Bottom view of the final canister muffler in-
stallation.
Tuned Pipe Installation
1.
Gather the header and tuned pipe parts as
shown below. 1 header, Teflon coupler, 2
steal clamps, and tuned pipe assembly.
2.
Iron the bottom covering to ensure it is tight
and well sealed to the wood of the pipe tun-
nel. Use a hobby knife cut the covering from
the pipe tunnel.
62
Hide quick links:
Advertisement
Table of Contents
