Table of Contents
Advertisement
23.
Use a drop of thick CA to tack glue the pipe
mounting doublers in place.
24.
Place the canister strap assembly in the canis-
ter tunnel as shown. Allow the nylon tie lock
to extend out of the tunnel 11/2" as shown.
25.
Place the canister mounting bracket over the
canister mounting strap.
26.
Place a drop of blue locktite on each canister
mounting bolt. Insert the two mounting bolts
through the top of the canister tunnel and into
the blind nuts on the opposite side.
70
Hide quick links:
Advertisement
Table of Contents
