Introduction - AeroWorks ProX260 ARF-QB Assembly Manual

INTRODUCTION

Your new ProX260 ARF-QB is a highly aerobatic airplane. It is capable of both precision
and 3-D maneuvers. The aircraft builds easily, quickly, and precisely due to its state of the
art CAD design, LASER cut technology, and high quality included hardware. We hope you
enjoy building and flying your ProX260 ARF-QB.
Great care has been taken in both the design and manufacturing of the ProX260 ARF-QB to
allow for the strongest and lightest construction possible. Only the highest quality materials
from the covering, paint, wood and hardware have been used in the construction of this
model.
The ProX260 ARF-QB has been individually hand built, covered and painted by trained and
experienced craftsmen with over 25 years of manufacturing experience. Using CAD design,
laser cut technology and jig-built assures accuracy in all stages of production.
The ProX260 ARF-QB is designed for glow engines. The OS engines shown in the assembly
are available from Aeroworks. The 46-60 ProX260 Was tested with an OS 55AX and the 60-
90 ProX260 was tested with an OS 75AX. Both have outstanding performance. The final
choice of engine is left up to the builder. A computer radio is recommended to allow the pi-
lot to take advantage of the full capabilities of this aerobatic aircraft.
IMPORTANT Please read through this manual carefully, before starting the assembly of
your new ProX260 ARF-QB . Inventory and inspect all parts and hardware for any imper-
Aeroworks immediately
fections or damage. Notify if there are missing or damaged
parts.
INTENDED USE
This plane should not be regarded as a toy. This is an aerobatic plane and is recommended for pilots
who are beyond the trainer-stage and are comfortable with flying an aerobatic sport plane.
READ! WARRANTY READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. All returned parts must be
shipped in their original shipping boxes and insured for full replacement value. If you wish to
return this aircraft for any reason a 15% restock fee will be charged to the customer. In addi-
tion the customer is responsible for all return shipping cost and all prior shipping cost will
not be refunded. Parts will be fixed or replaced once the original item is returned at the
owner's expense. It is the decision of Aeroworks if the item is to be replaced or repaired.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore,
The purchaser/operator accepts all responsibility of any and all structural or
mechanical failures.
4