Introduction - AeroWorks 35cc EXTRA 300 ARF-QB Assembly Manual

INTRODUCTION

Your new 35cc EXTRA 300 ARF-QB is a highly aerobatic airplane. It is capable of both pre-
cision and 3-D maneuvers. The aircraft builds easily, quickly, and precisely due to its state
of the art CAD design, LASER cut technology, and high quality included hardware. We hope
you enjoy building and flying your 35cc EXTRA 300 ARF-QB.
Great care has been taken in both the design and manufacturing of the 35cc EXTRA 300
ARF-QB to allow for the strongest and lightest construction possible. Only the highest qual-
ity materials from the covering, paint, wood and hardware have been used in the construction
of this model.
The 35cc EXTRA 300 ARF-QB has been individually hand built, covered and painted by
trained and experienced craftsmen with over 25 years of manufacturing experience. Using
CAD design, laser cut technology and jig-built assures accuracy in all stages of production.
The 35cc EXTRA 300 ARF-QB is designed for gas engines in the 35cc to 45cc category.
The Brillelli 46cc engine is shown in the assembly instructions. The aircraft was tested with
the Brillelli 46cc and has outstanding performance. The final choice of engine is left up to
the builder. A computer radio is recommended to allow the pilot to take advantage of the full
capabilities of this aerobatic aircraft.
IMPORTANT Please read through this manual carefully, before starting the assembly of
your new 35cc EXTRA 300 ARF-QB . Inventory and inspect all parts and hardware for any
Aeroworks immediately
imperfections or damage. Notify if there are missing or dam-
aged parts.
INTENDED USE
This plane should not be regarded as a toy. This is an aerobatic plane and is recommended for pilots
who are beyond the trainer-stage and are comfortable with flying an aerobatic sport plane.
!READ! WARRANTY !READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. All returned parts must be
shipped in their original shipping boxes and insured for full replacement value. If you wish to
return this aircraft for any reason a 15% restock fee will be charged to the customer. In addi-
tion the customer is responsible for all return shipping cost and all prior shipping cost will
not be refunded. Parts will be fixed or replaced once the original item is returned at the
owner's expense. It is the decision of Aeroworks if the item is to be replaced or repaired.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore,
The purchaser/operator accepts all responsibility of any and all structural or
mechanical failures.
4