Introduction - AeroWorks Carbon Cub SS ARF-QB Assembly Manual

INTRODUCTION

Your new Carbon Cub SS ARF-QB is a scale airplane. The aircraft builds easily, quickly,
and precisely due to its state of the art CAD design, LASER cut technology, and high quality
included hardware. We hope you enjoy building and flying your Carbon Cub SS ARF-QB.
Great care has been taken in both the design and manufacturing of the Carbon Cub SS ARF-
QB to allow for the strongest and lightest construction possible. Only the highest quality ma-
terials from the covering, paint, wood and hardware have been used in the construction of
this model.
The Carbon Cub SS ARF-QB has been individually hand built, covered and painted by
trained and experienced craftsmen with over 30 years of manufacturing experience. Using
CAD design, laser cut technology and jig-built assures accuracy in all stages of production.
The Carbon Cub SS ARF-QB is designed for gas engines in the 100cc gas category. DLE
111cc engine is shown in the assembly instructions. The aircraft was tested with the DLE
111cc and has outstanding performance. The final choice of engine is left up to the builder.
A computer radio is recommended to allow the pilot to take advantage of the full capabilities
of this aircraft.
IMPORTANT Please read through this manual carefully, before starting the assembly of
your new Carbon Cub SS ARF-QB . Inventory and inspect all parts and hardware for any
Aeroworks immediately
imperfections or damage. Notify if there are missing or dam-
aged parts.
INTENDED USE
This plane should not be regarded as a toy. This is an intermediate to advanced skill level model and
is recommended for pilots who are beyond the trainer-stage.
!READ! WARRANTY !READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. All returned parts must be
shipped in their original shipping boxes and insured for full replacement value. If you wish to
return this aircraft for any reason a 15% restock fee will be charged to the customer. In addi-
tion the customer is responsible for all return shipping cost and all prior shipping cost will
not be refunded. Parts will be fixed or replaced once the original item is returned at the
owner's expense. It is the decision of Aeroworks if the item is to be replaced or repaired.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore,
The purchaser/operator accepts all responsibility of any and all structural or
mechanical failures.
4