Sms Messages Parameters - Digi transport User Manual

SMS Messages parameters

This menu option has three identical rows, each of which controls the setting of the SMS alert
messages.
.
Note The SMS Messages option is only available on routers with W-WAN capability.
Send SMS messages to
The destination telephone number (MSISDN) for SMS alert messages. The format for this field
is the international dialing code followed by the number, but should not contain a + prefix. For
example, UK mobile 07871 445677 would be 447871445677.
If the event priority is at least n
Sets the trigger level for the alert message. For example, if this field is set to the value 6, only
events with a priority of 6 or higher will trigger an automated SMS alert. Setting this field to 0
disables sending SMS alerts.
Use SMS template
The name of the template file that used to form the basis of any alarm messages generated by
the event logger. The default template file is a file called EVENT.SMS that is stored in the
compressed .web file. A new template can be created, and if named EVENT.SMS, it takes
precedence over the pre-defined EVENT.SMS template. However, it is recommended that a
new name is used, such as event1.sms. Templates should use the .SMS file extension.
Send a maximum of n SMS messages per day
Limits the number of SMS alert messages sent by the router in any one day.
n SMS messages have been sent today
A status message, indicating how many SMS alert messages have been sent during the last 24-
hour period.
Digi TransPort User Guide
Event Settings parameters
596