Table of Contents
Advertisement
C.2.
DOS Software Operating Panel—OL600e & OL610e
•
The diagnostic and adjustment controls on the DOS Operating Panel are on the Settings tab,
available to the end user, and the Service tab, available to service personnel only.
•
The Operating Panel uses Windows-type controls and displays.
C.2.1
Settings Tab
•
Selected controls on the Settings tab perform adjustment and resetting functions. This tab is
avialble to the end user.
•
At the DOS prompt, enter OL600. When the Operator Panel appears, click on Settings or press
the ALT and S keys.
Reset Item
•
Click on the item to be reset, then click on Reset.
(1) EEPROM
•
Resets all EEPROM areas, including Menu level-2, to the factory default values.
•
The following items are not reset:
Head drive time setting
Fine adjustment of printing start position
Standard tray paper feed amount setting
(2) Menu
•
Resets all level-1 menu settings to factory fefault values, including all available emula-
tions and options.
(3) Drum Count
•
Resets the drum life data. Perform this function whenever the image drum is replaced.
Print Position Adjust
•
Adjusts the horizontal and vertical printing position of the first character of the first line on the
page.
•
Range of settings: -2.00mm to +2.00mm, in 0.25mm increments.
•
Selected desired setting from list boxes.
Diagnostics Test
C - 9
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
Advertisement
Table of Contents
Troubleshooting
