3.3.11 Registration Roller - OKIDATA OL600e Service Manual

3.3.11 Registration Roller

(1) Remove the upper cover (see 3.3.1).
(2) Remove the lower base unit (see 3.3.7).
(3) Remove the motor assembly (see 3.3.8).
(4) With the lower base unit standing on its side (view A), remove the one-way clutch gear 1.
(5) Note the placement of the bearing on the left side of the registration roller. Press the
registration roller 2 to the right side (in the direction of the arrow as shown) and lift up the
left side. Remove the registration roller 2 and the bearing (registration) 3.
3
Parts Replacement
2
3 - 17
1
View A
View A
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602