Olev-11 Pcb - OKIDATA OL600e Service Manual

OLEV-11 PCB

(1) Remove the upper frame (see 3.3.2 steps (1) through (3)).
(2) Remove the connector 1.
(3) Remove the 2 screws 2, and remove the OLEV-11 PCB 3.
When mounting the printed circuit board, be careful to make sure that the sensor plate is
set correctly.
Multi-Purpose Feeder
Sensor Plate
D - 10
1
3
3
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
2