Sensor Layout Diagram; Sensor Functions And Sensing States - OKIDATA OL600e Service Manual

Sensor Layout Diagram

Sensor Functions and Sensing States

Sensor
Inlet Sensor 1
Inlet Sensor 2
Paper Sensor
Outlet Sensor
Paper End Sensor
Toner Low Sensor
Operation Description
Outlet sensor
Heat roller
Transfer roller
Paper sensor
Inlet sensor 1
Paper
Toner Inlet
end sensor
sensor sensor 2
Hopping
Function
Detects the leading edge of the paper and gives
the supervision timing for switching from
hopping operation to feeding operation.
Monitors paper feeding situation and paper size
based on the paper arrival time and running time.
Detects the form width.
Detects the leading portion of the paper.
Monitors the paper feeding situation.
Monitors the paper feeding and size
according to the time of arrival to and
leaving past the sensor.
Detects the end of the paper.
Detects the lack of toner.
2 - 11
Exit roller
Resist roller
roller
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
Sensing State
ON: Paper Exists
OFF: No Paper Exists
ON: A4 or larger
OFF: Smaller than A4
ON: Paper Exists
OFF: No Paper Exists
ON: Paper Exists
OFF: No Paper Exists
ON: Paper Exists
OFF: No Paper Exists