Lower Base Unit - OKIDATA OL600e Service Manual

3.3.7

Lower Base Unit

(1) Remove the upper cover (see 3.3.1).
(2) Remove the connecting cables 4 and 5 of the pulse and main motor from the connectors
(3) Remove the screw 9 from the grounding cable and the metal shield. The screw is located
(4) Remove the connector 6 of the LED head from the Main Control board 1.
(5) Remove seven screws 7, then remove the lower base unit 8.
Note: Use care when lifting the lower base unit. Do not deform the ground clip 10 for the
2
Parts Replacement
2 and 3 of the Main Control board 1.
directly above CN1 and the 8-pin DIN connector for the second feeder/multi-purpose
feeder.
second sheet feeder.
7
7
7
6
4 5
9
2
3
2
3
10
3 - 13 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
7
8