Advertisement
SELECT light must be on to enter
macro mode.
Macro 4
These buttons correspond to
the four macros.
Menu Select Mode
To enter macro mode, press
FONT SELECT and CHARACTER
PITCH simultaneously.
To call a previously defined
macro, hold down the button of
the macro you want to invoke
and press CHARACTER PITCH.
To save current panel settings
as a macro, hold down the
button of the macro you want
to define and press PRINT
QUALITY.
This is another feature that allows you to change printing styles without
programming. It is also used to set the printer's serial interface configuration
to match your computer. As you step through the menu, each
item
and
selection is printed out. The printer stores changes to the menu in a special
area of
its
memory, so that they are preserved even when the printer
is
off and they become the default settings
(automatically
set when you
turn the printer on).
You'll find a list of the menu selections in the Appendix; complete
information on using the Menu Select mode is in the Reference
Guide.
Control Panel
29
Advertisement
