Sensor Plate (Outlet) - OKIDATA OL600e Service Manual

3.3.17 Sensor Plate (Outlet)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the eject roller assembly (see 3.3.4).
(3) Remove the lower base unit (see 3.3.7).
(4) Remove the fusing unit assembly (see 3.3.13).
(5) Press the clamp of the sensor plates (outlet) 1, and remove the sensor plate by pushing
it up from the bottom.
Note: This is a two-part sensor. Use great care when handling/replacing.
Clamp
Clamp
1
1
Parts Replacement 3 - 23 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602