Cleaning; Cleaning Of Rollers - OKIDATA OL600e Service Manual

Cleaning

When the transfer is completed, the residual toner left on the image drum is attracted
to the cleaning roller by static electricity, and the image drum surface is cleaned.

Cleaning of Rollers

The charge, transfer and cleaning rollers are cleaned in the following cases:
• Warming up when the power is turned on.
• Warming up after the opening and closing of the cover.
• When the number of sheets accumulated reaches 10 or more, and the printout
operation ends.
• Cleaning initiated by the user.
Changes in bias voltage applied to each roller moves the excess toner off the roller to
the image drum and returns it to the developer.
Operation Description
Cleaning roller
Power
supply
2 - 26
Image drum
Transfer roller
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602