Periodical Maintenance; Periodical Replacement Parts; Cleaning; Cleaning The Led Lens Array - OKIDATA OL600e Service Manual

5.

PERIODICAL MAINTENANCE

5.1

Periodical Replacement Parts

The parts are to be replaced periodically as specified below:
Part Name
• Toner cartridge
• Image drum
cartridge
5.2

Cleaning

Remove any toner or dust accumulated inside the printer. Clean in and around the printer
with a piece of cloth when necessary. Use the handy cleaner (vacuum) to clean inside the
printer.
Note: Do not touch the image drum, LED lens array, or LED head connector block.
Do not use solvents.
5.2.1

Cleaning the LED Lens Array

Clean the LED lens array or replace the toner cartridge when white lines or stripes (void, light
printing) appear vertically down the page, as shown below.
Note: The LED lens array must be cleaned with an LED head cleaner, provided with each
toner replacement kit.
White lines or stripes
(void, light printing)
Periodic Maintenance
Condition for Replacement
About 2,000 sheets of
paper have been printed.
About 20,000 sheets of
paper have been printed.
5 - 1
Cleaning Remarks
• LED head Consumables
• LED head Consumables
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602