Table of Contents
Advertisement
C.1.1
User Maintenance Menu
•
To enter the user maintenance menu, turn the power on while holding down the Menu key.
•
The user maintenance menu provides the following functions:
(1) Hex Dump
•
The data received from the host is sent to the printer in hexadecimal notation.
•
Printing starts automatically when the received data exceeds one page. If the received data
is less than one page, printing can be activated manually be pressing the Form Feed key
after changing to the OFF LINE mode. To print automatically even when the received data is
less than one page, select the Auto Eject function on the menu.
•
To exit from this menu, turn the power off.
(2) Menu Reset
•
All settings for Menu level-1 are reset to the factory default values.
•
The menus for all available emulations, including options, are reset to the factory default
values.
•
The operation mode starts automatically when the menu reset is complete.
(3) Drum Counter Reset
•
This function resets the drum life data when the user replaces the image drum unit.
•
The operation mode starts automatically when the reset is complete.
(4) X-Adjust / Y-Adjust
•
This function sets the first character printing position on the first line.
•
The operation mode starts automatically upon completion of resetting.
(5) Operator Panel Menu Disable
•
This function is for enabling and disabling of the operation panel menu functions (Menu 1,
Menu 2, Tray Select, Copies and Paper Size).
Diagnostics Test
C - 2
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
Advertisement
Table of Contents
Troubleshooting
