4.2
Adjustment When Replacing a Part
Adjustment is necessary when replacing any one of the following parts.
4.2.1
Setting of LED Head Drive Time
Note:
When the luminous intensity marking of the replacement LED head (new part) is
same as that of the removed LED head (old part), do not set the LED head drive time.
Luminous Intensity Marking Label
Adjustment
Part Replaced
LED Head
Set the LED head drive time.
Image Drum Cartridge
Reset the image drum counter
(refer to User's manual).
A4 300
4 - 3
Adjustment
Last 3 digits represent the
LED head marking number.
Luminous intensity marking
100
|
313
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602