3.3.17 Operation Panel Board and Operation Panel cord
(1)
Remove the upper cover.(See. 3.3.4)
Release the two claws and remove the operation panel frame Assy 1.
(2)
Release the two claws of the operation panel frame 1, remove the board LSO 2 and
(3)
core 3.
(4)
Assemble in the reverse order of disassembly.
Remark on assembly:
(1) Make sure that there is not any dust or oil on the connector contact section A. If it
is found, wipe it off by aicohol.
(2) When connecting the cable to the connector, make sure that they are securely locked,
and not joined askew.
3
43471801TH Rev.1
2
Oki Data CONFIDENTIAL
A
1
OK
NG
48 /