Hopping Roller Assembly - OKIDATA OL600e Service Manual

3.3.9

Hopping Roller Assembly

(1) Remove the upper cover (see 3.3.1).
(2) Remove the lower base unit (see 3.3.7).
(3) Remove the motor assembly (see 3.3.8).
(4) With the lower base unit 1 standing on its side, remove the one-way clutch gear 2 and
the bearing (A) 3, then remove the hopping roller assembly 4 and the bearing (B) 5.
Note: Take special note of the orientation and position of the bearings. Do not lose the
bearings.
Parts Replacement
3
1
2
3 - 15
Service Manual, P/N 59271602
4
5
OL600e/610e/610e-PS/610e-S