Toner Sensor (Adhesion) - OKIDATA OL600e Service Manual

3.3.16 Toner Sensor (Adhesion)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the lower base unit (see 3.3.7).
(3) Press the clamp of the toner sensor 1, and remove the sensor by pushing it up from the bottom.
Clamp
Clamp
1
1
Parts Replacement 3 - 22 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602