Sensor Plate (Inlet) - OKIDATA OL600e Service Manual

3.3.15 Sensor Plate (Inlet)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the lower base unit (see 3.3.7).
(3) Press the clamps of three sensor plates (inlet) 1, and remove the sensor plates by
pressing them upward from the bottom side.
Inlet sensor 2
Parts Replacement
1
Paper sensor
Inlet sensor 1
3 - 21
1
Clamp
Clamp
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602