Hopping Roller Shaft Assembly And One-Way Clutch Gear - OKIDATA OL600e Service Manual

Hopping Roller Shaft Assembly and One-way Clutch Gear

(1) Open the front cover 1.
(2) Remove the 2 screws 2, and remove the hopping roller frame 3 (be careful not to lose the
Springs 4 when you do this, since it comes off).
(3) Remove the One-way clutch gear 5.
(4) Remove the bush-A 6, and remove the hopping roller shaft assembly 7 (be careful not
to lose the bush-B 8 when you do this, since it comes off).
Second Paper Feeder
1
E - 11
7
8
2
3
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
5
6
4