C.1.3
Engine Maintenance Menu
•
The engine maintenance menu is activated when the power is turned on while holding
down the Form Feed key and the Enter key.
•
The method for exit from this menu depends on the setting.
•
The engine maintenance menu provides the following functions:
(1) Head Drive Time Setting
•
Sets the drive time of the LED head.
•
For setting instructions, see page 4-3.
(2) Printing Start Position Setting
•
Sets the printing start position.
(3) Drum Count Total Display
•
Displays on the LCD the total number of drum revolutions of the unit, counted at the
engine block.
(4) Drum Count Display
•
Displays on the LCD the total number of EP drum revolutions counted at the engine
block.
(5) Factory Adjustment (for High Capacity Second Paper Feeder/Multi-Purpose Feeder)
•
Do not change the default settings.
(6) Engine Reset
•
All EEPROM areas used by the engine block are reset to the factory default values.
•
The following items are excluded:
Menu level-1
Menu level-2
Operator panel menu disable/enable
Page print disable/enable
•
Transition to the operation mode occurs upon completion of resetting.
Diagnostics Test
C - 6
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602