Paper Size Error - OKIDATA OL600e Service Manual

3

Paper Size Error

• Is paper of the specified size being used?
• No
• Yes Are inlet sensor levers 1 and 2 operating properly (moves freely when touched)?
• No
• Yes Does the outlet sensor lever operate properly (moves freely when touched)?
• No
• Yes Replace the power supply board.
Troubleshooting
Use paper of the specified size.
Replace the inlet sensor lever or clean the inlet sensor on the power supply
board.
Replace the outlet sensor lever or clean the outlet sensor on the power
supply board.
Heat roller
Transfer roller
Paper sensor
Inlet sensor 1
Paper
Toner Inlet
end sensor
sensor sensor 2
Exit roller
Outlet sensor
Registration
Resist roller
roller
Hopping
roller
6 - 25 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602