Troubleshooting Procedures; Troubleshooting Tips; Points To Check Before Correcting Image Problems; Tips For Correcting Image Problems - OKIDATA OL600e Service Manual

6.

TROUBLESHOOTING PROCEDURES

Note: Be sure to use proper anti-static practices when handling electrostatically sensitive compo-
nents.
6.1

Troubleshooting Tips

(1) Check the toubleshooting section in the user's manual and soft manual.
(2) Gather as much information about the situation as possible.
(3) Inspect the equipment under the conditions close to those in which the problem had oc-
curred.
6.2

Points to Check before Correcting Image Problems

(1) Is the printer being used in proper ambient conditions?
(2) Are supplies (toner) and routine replacement parts (image drum cartridge) being replaced
properly?
(3) Does the paper being used meet specifications?
(4) Is the image drum cartridge installed properly?
6.3

Tips for Correcting Image Problems

(1) Do not touch, or bring foreign matter into contact with the surface of the image drum.
(2) Do not expose the image drum to direct sunlight.
(3) Keep hands away from the fuser unit as it heats up during operation.
(4) Do not expose the image drum to light for longer than five (5) minutes at room temperature.
Troubleshooting 6 - 1 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602